How to Install a Ghost Immobiliser
Ghost immobilisers can be an effective deterrent to thieves of cars. By pairing this device with other security systems and staying vigilant, you can put together a robust defense against modern, tech-savvy thieves.
A ghost immobiliser will protect your vehicle from key cloning, hotwiring and relay car theft by requiring a pin code to start the engine. It works by using buttons on your steering wheel and centre console, which makes it unnoticeable to criminals.
Identifying the Wires
With more and more vehicles being stolen without the owner's keys, it is essential to secure your vehicle. A ghost immobiliser is an excellent method to add an extra layer of protection for your vehicle. It blocks all signals coming from your key fob, making it is impossible to start the car without entering a PIN.
You can install the ghost immobiliser on yourself, but it is recommended to let a professional do the work. A professional technician will know the best place to install the device and how to connect it to the wiring of your vehicle. The installation process can be complicated, and it is essential that all connections are done correctly to avoid any damage or malfunctions.
Wearing safety gear and working in a space that is well-lit will ensure you get the most effective results. It is also recommended to read the user guide to get familiar with the wiring system. This will enable you to identify the wires that are required for installation, and ensure you have the proper equipment and components.
Once the wiring is connected, you can reconnect your battery and test to verify that the system is functioning properly. It is also important to ensure that the battery terminals are secure to avoid electrical problems. Finally, you should mark the CAN H and L wires with labels or tape so that you can keep track of them during the installation process.
If you would like to allow an individual to drive your vehicle temporarily for valet parking or when your vehicle is in for service, the Ghost Immobiliser can be set to Transport Mode. You can enter the code using an option on the steering column, centre console, or door panels. Then, the Ghost Immobiliser enters PIN code changing mode.
Some thieves attempt to bypass the ghost immobiliser employing spoofing or jamming devices to block or send fake signals to the system. This can be avoided by investing in modern anti-jamming technology, and by regularly checking your Ghost Immobiliser to detect signs of interference.
Disconnecting the Battery
The ghost immobiliser is a cutting-edge security tool designed to stop car theft. It uses innovative technology to monitor the engine and deactivate it when the correct PIN is entered. This prevents the vehicle from being taken by thieves. The system is extremely effective and stealthy, with no visible indicators to stop criminals. You may have to take away your device to ensure maintenance, upgrades or when selling your car.
This process requires specialized tools and skills, since you will be working using wires and bypassing specific factory components. It is also essential to follow the step by step instructions provided by the manufacturer. It is recommended to consult an expert mechanic or auto electrician particularly if you're not experienced in working on vehicles.
It is essential to assess your battery's condition after disconnecting the wires. Verify that the battery is clean, free of corrosion and that all connections are secure. If needed, you may want to replace the battery to ensure it is able to handle the electrical demands of an aftermarket security system.
After you have disconnected the wiring, you can then remove the ghost immobiliser. Strippers or wire cutters are a good way to disconnect the wires. Be careful not to cause damage to them or their terminals. Make sure to label each wire to ensure that you are able to reconnect them correctly in the future. If auto ghost immobiliser have been soldered, use a tool that is heat-resistant to break the connection. It is also important to shield the wires with insulation tape or heat shrink tubing to stop them from short circuits.
Connect the wires to the constant 12V power source. If required you can use a fuse tap to ensure that the connections are protected by fuse. Lastly, connect the grounding wire to a grounded point on the vehicle's chassis.
Once you've reconnected the wires, turn off your vehicle and enter the PIN. Then, start the engine. If it does not start then the ghost immobiliser has been removed successfully.
Making Connections
Ghost immobilisers are an affordable solution to increase the safety and security of your vehicle. It connects to the CAN bus system of your car, capturing signals, and preventing the vehicle from starting until the correct PIN code is entered. This device is practically impossible to disable and is a great option for drivers who need extra security and peace of mind. In conjunction with a Thatcham Approved tracking system, it could also help reduce your insurance costs.
It is crucial to get and read the wiring diagram of your car model prior to start the installation. The diagram can serve as a guideline to identify the wires needed for precise connections. Using the proper connections or soldering techniques will ensure that the connection is long-lasting and secure.
The wires that connect the Ghost immobiliser to the CAN bus system need to be properly identified and connected. Use small labels or tape to mark the CAN L and H wires. This will help prevent confusion during installation. The wires are positioned differently on each vehicle. It is important to reference the wiring diagram or online resources in order to identify them.
When the correct cables are connected After connecting the correct cables, power will be restored to the Ghost immobiliser. It is a good idea to test your immobiliser. Start the engine without entering the code. This will ensure that the immobiliser was installed correctly and is functioning exactly as it was intended to. It is a good idea to test your immobiliser regularly to assist in identifying any issues or problems early on.
Another benefit of the ghost immobiliser is that it can be set up in a matter of minutes and does not require any cutting or modification to your vehicle's internal wiring. It is also an excellent choice for those who wish to enhance the security of their vehicles as it can be used in conjunction with a Thatcham-approved tracker or alarm, which will notify your tablet or phone when the vehicle is being tampered with.
Mounting the Unit
The Ghost immobiliser is a great an effective deterrent for car thieves especially when paired with the use of a GPS tracking device. It uses buttons on the centre console, doors, and steering wheel to create a unique sequence you are able to recognize. This prevents your car from starting. It is also tamperproof and weatherproof. It comes with a 3 year warranty and is recommended for use by a number of insurance companies.
During the installation process it is important to follow the instructions carefully. While some people can handle the job themselves, it's best to consult a professional if you are unsure. Wire strippers and multimeters are vital tools to determine the wiring and make precise connections. It's also recommended to buy some insulation and electrical tape for protecting the connections from potential damage. After the installation is complete, it's a good idea to test the device to make sure that it's functioning as intended.
A Ghost immobiliser is an excellent way to protect your vehicle against theft, particularly in high-crime areas. It stops key cloning, ECU swapping and other security threats, and it can be linked to an iPhone application to make it easy to manage and monitoring. It's popular among car owners who want to safeguard their investment.
The Ghost II immobiliser is designed in a low-profile, sleek design that makes it virtually unnoticeable by thieves. It is connected to the CAN (Controller Area Network) system of your vehicle and prevents the engine from being started without a PIN code being entered. The PIN code is generated by a unique sequence of keys on the steering wheel and centre console, as well as the doors and can be changed at anytime. The device is also secure against tampering and has a GPS tracking system that can assist police in locating your car in the event of theft. It's an excellent option to safeguard your car from thieves and is Thatcham approved.