How to Install a Ghost Immobiliser
Ghost immobilisers are hidden security system that shields your car from key cloning and hacking. It prevents the engine from running until it is started with PIN codes that can be up to 20 characters in length.
This extra layer of protection is not visible to thieves who may not expect it. Certain systems have an app which allows the owner to disable their immobiliser if they forget their PIN number or use the service/valet mode.
Connecting the vehicle's CAN Bus to the vehicle's
The Ghost 2 Immobiliser, a cutting edge security system, can be incorporated directly into the ECU of your vehicle. It provides a discreet barrier against thieves. It is highly effective and user-friendly and can be a valuable option to add to your vehicle's security arsenal. However, like any anti-theft device, it is not impervious to failure and requires regular maintenance to ensure proper operation. This guide will help you make the most of your Ghost 2 immobiliser.
CAN (Controller Area Network), a robust serial networking system that lets microcontrollers communicate with each over short distances. A central control unit is not required. It is designed to allow multiplexing of electrical wiring in vehicles to reduce copper usage and comes with a variety of advantages, including low cost and a simple use.
The CAN protocol is utilized in the majority of modern automobiles to connect with the engine management system, steering control module, air conditioning controls, and many more. It also transmits sensor data like speed sensors and inputs, to control the various functions of the car. The CAN bus can be used to monitor the condition of these various components and can prevent the vehicle from starting when it is in a dangerous condition.
While the CAN bus could be used for a variety of purposes, it's crucial to know how it functions and how it's secured. It is possible to add additional features to a vehicle by using CAN bus, but it's crucial to safeguard it from hackers and other threats. Installing a firewall and monitoring your CAN-bus with software is the best way to do this.
Ghost2's control device is hidden in the dashboard of the car or in the wiring harness, which prevents an intruder from physically altering it. It is also impossible to reset a pin code or an emergency code without having access to the car.
You can activate Transport Mode If you need to give your vehicle away for service, valet parking or any other reason. This option disables the Ghost immobiliser's keyfob and ignition functions, and will only reactivate when the vehicle is speeding at 31 mph for 15 minutes.
How do you create a PIN code
The Ghost immobiliser protects your car from theft. The innovative technology uses an PIN to disable the engine of the vehicle and stop it starting without the correct code or an authorized fob or mobile. The system's subtle design is unnoticeable and provides unparalleled protection against theft. Moreover the system is TASSA verified and can provide significant savings on car insurance premiums.
During installation, the Ghost system enters the learning mode to record the sequence of buttons pressed to create your unique pin code. The installer will guide you through activating the system after the pin code is created. Once activated, auto ghost immobiliser starting motor unless you enter a valid PIN or switch the vehicle into transport mode. This makes it very difficult for thieves or cloners to hack or replicate your starter system.
Installing an Ghost immobiliser is straightforward however it is essential to follow the specific instructions in the user manual to ensure proper operation. Multimeters and hand tools can be used to check electrical values. Insulation tape as well as heat shrink tubing and cable ties are a good option to shield wires from damage. Check the system on a regular basis to identify any potential problems.
It is essential to test the system one more time before you turn on the ignition. The Ghost immobiliser will re-arm itself after a period of 3 to 30 seconds, depending on your car's model. The system also comes with the option of a Service/Valet mode, which allows you to temporarily remove the system for servicing your vehicle or valet parking.
Idealy, the immobiliser will be hidden under the dashboard or the steering wheel. Make use of a small piece of tape or paint on the CAN H and L wires to make them easier to find during testing. The CAN H and L wires should also be connected to an electrical source that provides a constant 12V. It is also essential to check the connections again after testing, as misidentifying these wires could cause the system to malfunction.
Activating the system
A ghost immobiliser prevents your car from starting until you press a number of buttons inside the vehicle, usually on the steering wheel, the door panel or the central console. The sequence can be changed by the user at any time. Once activated, the system can't be removed. This is a fantastic option for anyone looking to protect their vehicle from theft.
The system is designed to be undetectable, meaning it can't be detected by modern diagnostic tools or code-grabbing technology. It does not emit radio frequencies either, making it even harder for thieves to detect.
If the device is detected, it will prevent the engine from starting and sound an alarm that is loud enough to scare away the thief. The device can be used to monitor the location of the car and help police locate it when it is stolen.
Contact Car Specalist Customs for a estimate or to discuss your options if you're interested in Ghost immobiliser. We are fully qualified to install a ghost immobiliser on your vehicle, and will make sure it is hidden in a remote area. We can also install additional security measures, such as a kill switch or wheel lock to ensure your vehicle is secure from theft.
Disarming the System
It's important to understand how to disable the Ghost immobiliser, if it's installed on your car. You can use this in the event you forget your keys or your battery dies. The system uses an unique PIN code that only you know. It cannot start the car without this code. Pressing a combination button on the steering wheel or on the dashboard is the simplest method to enter your code. This is much easier than using a key fob, and prevents others from copying the remote.
Ghost2 is noninvasive, unlike some aftermarket immobilisers that require cutting wires for installation. It also connects to the CAN bus system of your vehicle to function. Its most prominent feature is that it shuts off the engine, without affecting normal functions of the vehicle. This makes it difficult for thieves to use signal boosters or clone car keys. It doesn't emit radio frequency, so thieves won't be able to detect it.
The Ghost system has a Transport Mode that lets you temporarily disable security for situations like transportation or service. This feature is ideal when you're lending your vehicle out to someone else without sharing your PIN number, or if your vehicle needs to be secured even while you drive it. To activate the Transport Mode you need to press the service button 5 times within a period of 2 seconds. The Ghost system will confirm activation with 5 signal indicators.
Keep the emergency code inside your vehicle in a secure location. If you happen to find yourself locked out of your vehicle, contact the technician or the company that installed the system and they will provide you with the code. If you're unable to get in touch with them, you can contact an authorized dealer. However, this might require verification procedures, and you may be charged for additional fees.
Apart from the ease of this system, you can depend on it to safeguard your vehicle from theft and help reduce the cost of insurance. Many insurance companies offer reduced rates or financial incentives to install this system to prevent theft.